Compaero shrink boot adapters

Shrink Boot Adapters

The Shrink Boot Adapter is a backshell that attaches to a connector's accessory threads to provide the necessary gripping area for a shrink boot. The Shrink Boot and Adapter are slipped over the cable and, after wiring is completed, the Adapter is attached to the connector. The Shrink Boot is positioned over the Adapter and the jacketed cable. As heat is applied to the Shrink Boot it shrinks tightly around the Adapter and cable forming an environmental seal. Compaero offers a number of Shrink Boot termination variations including Shield Sock, Stainless Steel Termination Band, Stainless Steel Constant Force Spring and Light Bulb Thread.

Series 30 shrink boot adapter

Series 30 Shrink Boot Adapters are an economical way to transition from a connector to a cable using a heat shrink boot. These adapters provide full environmental sealing.

Series 31 lamp base thread shrink boot adapter

Lamp Base Thread EMI/RFI Shrink Boot Adapter. This type of Shrink Boot Adapter is a simple way of adding a lipped shrink boot to a cable harness while providing EMI/RFI protection.

Compare to Glenair Series 311-001, 311-002 and 311-039.

Series 35 shield sock shrink boot adapter

Shield Sock Shrink Boot Adapter. This type of Shrink Boot Adapter has a tinned copper shield pre-attached and packaged for immediate application.

Compare to Glenair Series 319-001, 311-043 and 311-044.

Series 46 emi rfi shrink boot adapter

EMI/RFI Single Band Termination Shrink Boot Adapter. These shrink boot adapters provide an economical approach to terminating overall cable and harness shields and screens while accepting a lipped shrink boot.

Compare to Glenair Series 440-030, 440-031 and 440-069.

Series 48 emi rfi slotted shrink boot adapter

EMI/RFI, Slotted, Single Band Termination Shrink Boot Adapter. These shrink boot adapters provide an economical approach to terminating overall cable and harness shields and screens while accepting a lipped shrink boot.

Compare to Isodyne Series 150 Adapters

Series 49 tinel lock ring emi rfi adapter

Compaero Series 49 is for use with a Tinel-Lock Ring to provide EMI/RFI Protection. They also accept a lipped shrink boot to provide cable sealing and mechanical strain relief.

Compare to Glenair Series 440-084, 440-085 and 440-086 as well as Tyco (Raychem) TXR Adapters.