Compaero circular backshells

Circular Backshells

Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) generate interference. When strong external noise fields exist, the conductors of a cable act as antennas and pick up the radiated signals. The reception of this interference results in inaccurate or interrupted data transmission. An effective shield prevents the reception on undesired signals as well as confining extraneous signals generated within the cable itself. EMI/RFI Backshells enclose the cable in a tightly woven metal braid comprised of wire strands which is then terminated at one or both ends of the cable to ground potential. The termination and grounding of the shield is accomplished by using a suitable connector backshell. A variety of backshell configurations are available for termination of cable shielding.

Compaero series 55 backshell

This type of Backshell is suitable for an inside the box/climate controlled room application where heavy cabling should be supported with adequate strain relief. It is equivalent to Glenair Series 360-001 and 360-002.

Compaero series 60 backshell

This type of Backshell is suitable for fully environmental applications where heavy cabling should be supported with adequate strain relief. It is equivalent to Glenair Series 370-001 and 370-002.

Compaero series 61 backshell

This type of Backshell is suitable for moisture proof (water-tight) applications using a resilient grommet. It is equivalent to Glenair Series 370-003 and 370-004.

Compaero series 70 backshell

This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in a non-environmental enclosure.

Style A or H clamp

Compare to Glenair Series 380-001 and 380-002.

Compaero series 80 backshell

This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. It is equivalent to Glenair Series 390-001 and 390-002.

Compaero series 81 backshell

This type of Backshell provides EMI/RFI protection using 360 degrees of shield termination in an environmentally protected enclosure. It is equivalent to Glenair Series 390-003 and 390-004.