| LOGIN  | CATALOGS  | PART NUMBERING  | QUALITY  | DISTRIBUTORS  | ABOUT COMPAERO  | CONTACT US   |
PART NUMBER SEARCH  
OR COMPETITORS P/N  
CONNECT WITH US 


 

Coupling Rings

Coupling Ring Options
There are a variety of accessories available to provide a reliable EMI/RFI screening solution to your chosen backshell. Contact us to discuss any requirements that you may have which are not listed below.

STYLE 2 COUPLING RINGS

When the selected cable entry exceeds the MAX ENTRY stated in the INTERFACE TABLE, you may choose to have a type 2 assembly. The two-piece assembly allows a large cable diameter to be maintained as close to the connector body as possible, allowing maximum continuation of screens and wire protection, whilst also providing an access point close to the connector.

To specify a type 2 assembly, place modification code -079 at the end of the part number when ordering.
Modification Code Example: CPA461W-1410-VG0-079
To receive a standard one-piece adapter, no modification code is needed.

DIRECT COUPLING RINGS (OPTION D)
Direct coupling rings are available on straight adapters only.
SAFETY WIRE HOLES (OPTION T)
Safety wire holes can be specified on standard rotatable coupling rings to use with safety wire after installation. Safety wire ensures the coupling ring will not un-couple during shock and/or vibration. These are common on AS85049 accessories. When this option is specified the coupling ring will have 3 equally spaced wire holes (120 degrees apart). Safety Wire Holes are sufficient to accommodate 0.020 inch wire.
WRENCH FLAT COUPLING RINGS (OPTION W)
Common on most TACOM adapters, wrench flats are an available option on most Compaero adapters and backshells. Wrench flats allow for an easier way of screwing on the coupling ring (with a wrench) when working in tight spaces. For specifications on specific wrench flat dimensions (based on shell size and connector series) please contact us.
SELF-LOCKING COUPLING RINGS, DETENT (OPTION S)
Detent style self locking feature a ratcheting coupling ring using non corrosive clips located within the coupling ring. Many AS85049 specifications specify this detent style self locking coupling ring making this one of the most popular ways of achieving a self locking adapter or backshell.
SEAT-LOCK COUPLING RINGS, NON-DETENT SELF-LOCKING (OPTION E)
Using a spring loaded retaining ring, Compaero Seat-Lock coupling rings are a non detent way to achieve self locking. This option also ensures that the accessory teeth of the connector mate properly with the teeth on the adapter or backshell by applying constant force between the two. The Compaero Seat-Lock option is an excellent choice if an easy, economical self locking solution is required.

 

  © COPYRIGHT 2018 COMPAERO, INC. ALL RIGHTS RESERVED. - 379 TIMBER ROAD, MOORESVILLE NC 28115 USA - CAGE CODE: 0G3R1
  All information on this website, including illustrations, specifications, pricing and lead time is believed to be reliable. Mistakes and inaccuracies, however, may be inadvertantly published and compaero makes no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Website information is subject to change without notice. In addition, compaero reserves the right to make changes — without notification to customers

ABOUT SSL CERTIFICATES