Shrink Boot Options
Shrink Boot Options
Easily kit Compaero Adapters with HellermannTyton Shrink Boots. To specify a shrink boot use this section in conjunction with the desired series’ part number development.
The Specific shrink boot size is not needed, Compaero will kit the appropriate size with the Cable Entry of the adapter ordered.If the shrink boot required is not listed below please contact us today to order it separately.
Shrink Boots are kitted with Compaero Adapters by using a combination of the following three steps:
Highlighted items are generally kept in stock and readily available
Table 1 - Boot Type |
COMPAERO ORDER CODE |
HELLERMANNTYTON SHRINK BOOT SERIES |
STYLE |
CABLE ENTRY RANGE |
DESCRIPTION |
A |
313C722 to 774 |
Multi angle |
01 - 16 |
Convoluted boot, low profile, with adapter lip |
B |
313F322 to 396 |
Straight |
02 - 16 |
Straight boot, low profile, with adapter lip |
C |
333F322 to 385 |
Right Angle |
02 - 16 |
90 Degrees, low profile with adapter lip |
V |
150 Series (standard length) |
Straight |
02 - 16 |
Bottle shape with rib, VG Style (with eyelet) |
E |
100 Series with lip |
Straight |
02 - 16 |
Bottle shape with rib, MIL Style |
F |
120 Series |
Straight |
01 - 34 |
Bottle Shape, small diameter wire or cable |
G |
170 Series |
Straight |
03 - 12 |
Bottle shape with rib, for partially loaded wire bundles |
H |
190 Series |
Straight |
03 - 04 |
Bottle shape with external ribs |
J |
1100 Series low-profile |
Right Angle |
32 - 16 |
Used on airborne harnesses. Compact and low-profile |
K |
1100 Series with lip |
Right Angle |
32 - 16 |
Standard right angle lipped shrink boot |
L |
1100 Series low-profile |
Right Angle |
32 - 16 |
Used on airborne harnesses. Compact and low-profile |
M |
130 Series |
Straight |
32 - 16 |
Long outlet shape, low profile MIL Style |
N |
1100 Series high shrink ratio |
Right Angle |
33 - 13 |
For connectors with small cable diameters |
P |
1750 Series |
Straight |
34 - 16 |
Graduated Strain Relief, NAVSEA & Rail applications |
R |
200 Series (in-line) |
Straight |
02 - 16 |
2 way outlet, in-line |
S |
300 Series (in-line) |
Straight |
03 - 16 |
3 way outlet, in-line |
T |
400 Series (in-line) |
Straight |
03 - 16 |
4 way outlet, in-line |
Table 2 - Boot Material |
COMPAERO
ORDER CODE |
HELLERMANNTYTON
MATERIAL CODE |
TEMPERATURE
RANGE (℃) |
DESCRIPTION |
B |
B7 |
-55 to +135 |
Semi-rigid flame retarded polyolefin |
G |
G |
-75 to +150 |
Fluid resistant elastomer |
J |
J |
-55 to +135 |
Flexible polyolefin |
H |
H |
-55 to +105 |
Flexible limited fire hazard material |
L |
L |
-55 to +200 |
Flame retarded fluorocarbon |
6 |
6 |
-55 to +120 |
Modified elastomer blend
(use with shrink boot series A, B or C only) |
8 |
8 |
-55 to +150 |
Viton-polyester polymer blend
(use with shrink boot series A, B or C only) |
9 |
9 |
-55 to +120 |
Modified elastomer blend
(use with shrink boot series A, B or C only) |
Table 3 - Boot Adhesive |
COMPAERO ORDER CODE |
HELLERMANNTYTON ADHESIVE CODE |
TEMPERATURE RANGE(℃) |
DESCRIPTION |
0 |
NO ADHESIVE |
N/A |
- |
1 |
WM250 |
-50 to +80 |
Hot melt adhesive, halogen free (pre-applied to boot) |
2 |
W24 |
-75 to +200 |
Factory coated high performance epoxy |
3 |
W8 |
-55 to +120 |
Modified polymide hot melt adhesive (pre-applied to boot) |
4 |
HMT-200 |
-55 to +105 |
Hot melt tape (appropriate length kitted with shrink boot and adapter) |
5 |
TSA-200 |
-55 to +125 |
Thermoset adhesive (appropriate length kitted with shrink boot
hrink boots |
More about Hellermann/Tyton Shrink Boots and Shapes
HellermannTyton heat shrink molded shapes combine the advantages of quick, easy installation with high electric strength, mechanical
toughness and superior chemical resistance. Their products offer important functional and cost saving benefits for electrical
and electronic applications ranging from insulation and protection of individual components to fabrication of complete
inter-connecting cable harness assemblies.
Strain-relieving boots, transition and connector backshell covers, as well as other specialized shapes are available in a wide
range of sizes and options. HellermannTyton’s extensive product line includes low profile, bulbous and lipped types for use on
circular and D-type connectors as well as complex multi-way transitions. Only a minimum number of shapes are needed to
cover a full range of applications as the products have high shrink ratios of up to 5:1.
The use of heat shrink molded shapes in conjunction with HellermannTyton heat shrink tubing makes it easy to fabricate complete
jacketed wire and cable harnessing and interconnection systems of the highest quality. Heat shrink shapes are available
for the complete range of electrical and electronic harnessing applications. They can be sealed with special adhesives and
encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the
complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished, with minimum
weight and bulk.
|